Hallo Boelcke,

ich habe die Kampagne nach Anleitung installiert und angefangen zu spielen. Mir gef?llt sie bis dahin sehr gut, - ein gro?es Kompliment f?r Deine M?hen und Arbeit.

Allerdings habe ich ein kleines Problem und zwar tritt dies nach Ende der Missionen auf.

Es passiert z. B., das ich abgeschossen wurde und tor bzw. in Gefandgenschaft geraten bin, das in der Missionszusammenfassung die n?chste Mission angew?hlt werden kann. Normalerweise geht dann doch nur eine Wiederholung der Mission.

Dann passiert es, das ich nach erfolgreicher Mission gelandet bin, aber ind Missionszusammenfassung steht, das ich tot/gefangen bin.

Aktuelle Konfiguration ist 4.12.2 mit HSFX 7.02.

Gru?
Printe

Hi,

das ist ein Problem mit Asuras dgen.exe, was so wohl ?fter auftritt und auch immer mal geposteted wurde, da kann ich leider nichts dran machen, das ist Asuras job.

Danke f?r die Info, dann wei? ich zumindest wo der Fehler liegt.

Hast Du eine Ahnung, ob Asura an der L?sung arbeitet und wie man mit ihm in Kontakt treten kann?

Asura hat hier einen englischsprachigen thread - aber die Zusammenarbeit mit ihm ist eher sporadisch von seiner Seite aus

http://www.sas1946.com/main/index.php/topic,20104.996.html

Hi, I have followed the install instructions very carefully and tripple checked everything is as per instructed. I have a clean IL2 install patched to 4.12.1 and the only installed and activated mod is hsfx 7.0
However when I click the 'generate' button I get nothing! However I did find the following DGen error report in the games main folder.

"= DGen 4.0.0.9 (01/05/05) =
seed: 297823599
DGen initialization. Side: gb, Rank: 0
MaxBomberSkill=3
Distance=Any
Length=VeryLong
AI=Normal
Missions=Normal
AirIntensity=Medium
GroundIntensity=Medium
SlowFire=5.0
PromotionRate=1.000000
Career ID: GbB
1940_Duenkirchen
Error - mapname was expected"

Could one of you kind folk please shed any light on this problem for me?
Thank you.

That?s the problem:

DGen 4.0.0.9 (01/05/05)

you?re using stock dgen.exe, but the campaign need Asuras dgen.exe mod, the link is included on the dl page

hmmm...strange...I used the installer that came with Asuras's Dgen mod. will try re-installing. Thank you Boelcke

Hi, I have followed the install instructions very carefully and tripple checked everything is as per instructed. I have a clean IL2 install patched to 4.12.1 and the only installed and activated mod is hsfx 7.0
However when I click the 'generate' button I get nothing! However I did find the following DGen error report in the games main folder.

"= DGen 4.0.0.9 (01/05/05) =
seed: 297823599
DGen initialization. Side: gb, Rank: 0
MaxBomberSkill=3
Distance=Any
Length=VeryLong
AI=Normal
Missions=Normal
AirIntensity=Medium
GroundIntensity=Medium
SlowFire=5.0
PromotionRate=1.000000
Career ID: GbB
1940_Duenkirchen
Error - mapname was expected"

Could one of you kind folk please shed any light on this problem for me?
Thank you.

bobwat

I got this exact same error report. I have a clean install of '46 4.12.1, my only activated mod is HSFX 7.0, and get a loud beep when I click "generate", and it doesn't run. It looks like Asura's DGEN.exe didn't make it into our IL-2 folders. I ran the installer as well, and tried to re-install; no luck.

So, Boelcke, should we replace the default DGEN.exe file with the one in the mod folder? I just want to know what I'm doing.
________________________________

There are also a couple of things I noticed in the game files that I thought I should bring to your attention.

1.) I have copies of Asura's .dat files from DGen_MOD_2.0.1.2 in both my DGEN folder and DGEN\MOD folders. Will this cause any problems?

2.) I noticed two empty folders: dgen_boe22_channel142doe0, and dgen_boe10_englishchanneldoe4. Are they supposed to be empty?

Thanks.

So, Boelcke, should we replace the default DGEN.exe file with the one in the mod folder? I just want to know what I'm doing.
________________________________

There are also a couple of things I noticed in the game files that I thought I should bring to your attention.

1.) I have copies of Asura's .dat files from DGen_MOD_2.0.1.2 in both my DGEN folder and DGEN\MOD folders. Will this cause any problems?

2.) I noticed two empty folders: dgen_boe22_channel142doe0, and dgen_boe10_englishchanneldoe4. Are they supposed to be empty?

Thanks.

GrilledPear

yes, of course, replace the stock dgen.exe with asuras dgen mod exe file

(the dgen exe file is located in the Il2 root folder - i usualy using 7zip to unzip Asuras dgen.exe mod into a dummy folder or to desktop and copy the included files into the IL2 folder and into the \DGEN\MOD folder manualy)

to topic 1: no, but overwrite the dat files in the \DGEN\MOD folder with my plane data files which are added to the dl page:

http://www.axis-and-allies-paintworks.com/download.php?view.856

to topic 2: these folders are generated from dgen.exe to host the files from the ongoing campaign, they are empty because it wasn?t possible to create a mission like you posted.

Thanks, Boelke. I managed to get the campaign working. In addition to not having the proper Dgen.exe, I happened to miss some files I was supposed to copy.

Everything's working fine now, and I'm 10+missions into the RAF campaign. Really enjoying it.