... and today the P47 series ...

http://www.sas1946.com/main/index.php/topic,25142.msg291066.html#new

"P-47B now has correct engine geometry and cowl flaps, but skins are not yet adapted for it, so there is some skinning work to do. We hope to see some adapted P-47B templates, skins and default skins soon."

Birdman at SAS

I'm 'simless' at the moment, but has anyone tried some existing skins with this mod? ..how bad is it? Many of the 'classic skinners' for the Jug are no longer active, so it sounds as if we might be faced with chosing between quality skins or a refined 3D model. Unless someone here decides to tackle it. If that's the case, I guess we'll see you in a few years.. that's a lot of Jugs to re-skin! We'll leave a light on for 'ya

Thanks for the news Mick.

... well I dont have the P47B, but I can say I have no prob with the P47D10, D22 and D27 and also D ...

I must be suffering from pixel blindness; I did not notice that the 'B' model was specified. That's good news for our existing skin collections then

Thanks for the clarification Mick. Cheers!

The model B is in DBW had shorter nose, but Birdman asked if I could reduce the distance between the nose and fuselage keeping the length of the nose identical to the other models, because so was actually the model B.

http://crimso.msk.ru/Images6/AK/AK2004-04/40-4.gif

I have not come to prove nor skins found in those bearings, the only one I found is the default one in DBW and this was identical to Model D.
So to shorten distance between the fuselage and nose i told Birdman that should change the skins of this model, but as I said I have not gotten to test it and the mapping is the same.

Regards, Jero.

... can you believe that the Wildcats were also released today guys ...??

http://www.sas1946.com/main/index.php/topic,25142.msg291281.html#new

I must be suffering from pixel blindness;

Rudi_Jaeger

... well I got mad trying to get the new Wildcat 3D improvements to work, until I remembered Tiger's UV3 also had a 3D folder for his blue flames effects mod ... so I only had to replace UV3's Engine1_DO.msh with the new ones and here we go ...

By the way if you like the Ki84, then your day has come ...

http://www.sas1946.com/main/index.php/topic,25142.540.html

... and today Spitfire & Seafire Spinners ...

http://www.sas1946.com/main/index.php/topic,25142.new.html#new

... for Bf 109 lovers, new spinners ...!!

http://www.sas1946.com/main/index.php/topic,25142.0.html

JapanCat is also doing some 3D improvements here:

http://www.sas1946.com/main/index.php/topic,28639.0.html